-
Solar energy capital and electricity storage enterprise market analysis
The global solar energy storage market size was valued at $9.8 billion in 2021, and is projected to reach $20.9 billion by 2031, growing at a CAGR of 7.9% from 2022 to 2031. Solar energy storage generally includes energy storage batteries that is used for storage of excess solar power. Generally, solar battery is installed. The global solar energy storage market had high impact of COVID-19 due to social distancing norms and shortage of manpower. This led to delayed installations and cancellation of new projects. In addition, the sharp decline in consumer expenditure.
-
The correct way to charge energy storage charging piles
The battery for energy storage, DC charging piles, and PV comprise its three main components. These three parts form a microgrid, using photovoltaic power generation, storing the power in the energy storage battery.
FAQs about The correct way to charge energy storage charging piles
Can battery energy storage technology be applied to EV charging piles?
In this paper, the battery energy storage technology is applied to the traditional EV (electric vehicle) charging piles to build a new EV charging pile with integrated charging, discharging, and storage; Multisim software is used to build an EV charging model in order to simulate the charge control guidance module.
What are the charging pile instructions?
Instructions for Charging Pile-V1.3.0: Power Output Mode: Can be switched between intelligent mode and priority mode. In intelligent mode, the charging pile power is equally distributed between the two vehicle connectors.
What are electric car charging piles?
Electric car charging piles are fixed structures on the ground that provide AC electric energy for electric cars with on-board chargers using special charging interfaces and conduction modes. They have corresponding communication, charging, and safety protection functions. (How to Charge an EV imported from China)
Can energy-storage charging piles meet the design and use requirements?
The simulation results of this paper show that: (1) Enough output power can be provided to meet the design and use requirements of the energy-storage charging pile; (2) the control guidance circuit can meet the requirements of the charging pile; (3) during the switching process of charging pile connection state, the voltage state changes smoothly.
Why is it important to maintain the charging pile?
The importance of maintaining charging piles lies in the fact that influences by the changeable environment and ageing inner parts can cause various faults. Regular examination and maintenance are necessary during both product storage and using processes.
What is the installation distance of the charging pile?
The minimum installation distances for the charging pile are: no less than 700 mm from the back door to the wall, and no less than 500 mm from the side face to the wall. (5) The canopy is built together with the charging pile. (6) This installation method is just a sample for reference.
-
Advantages of the development of new energy storage equipment
Key Benefits of Energy Storage SystemsBoosting Renewable Energy Integration Energy storage systems are essential for integrating renewable energy sources like solar and wind into the grid. Enhancing Grid Stability and Resilience ESS play a crucial role in stabilizing the power grid.
FAQs about Advantages of the development of new energy storage equipment
Why is energy storage important in electrical power engineering?
Various application domains are considered. Energy storage is one of the hot points of research in electrical power engineering as it is essential in power systems. It can improve power system stability, shorten energy generation environmental influence, enhance system efficiency, and also raise renewable energy source penetrations.
What role does energy storage play in the future?
As carbon neutrality and cleaner energy transitions advance globally, more of the future's electricity will come from renewable energy sources. The higher the proportion of renewable energy sources, the more prominent the role of energy storage. A 100% PV power supply system is analysed as an example.
What is energy storage technology?
Proposes an optimal scheduling model built on functions on power and heat flows. Energy Storage Technology is one of the major components of renewable energy integration and decarbonization of world energy systems. It significantly benefits addressing ancillary power services, power quality stability, and power supply reliability.
Why do we need advanced energy storage systems?
The evolution of ground, water and air transportation technologies has resulted in the need for advanced energy storage systems.
How is energy storage technology used in power system applications?
Energy storage technology in power system applications according to storage capacity and discharge time . The selection of an energy storage technology hinges on multiple factors, including power needs, discharge duration, cost, efficiency, and specific application requirements .
How can storage devices reduce energy consumption?
These technologies' quick response times allow them to inject or absorb power quickly, controlling voltage levels within predetermined bounds. Storage devices can minimize the impact on stored actual energy by continually providing reactive power at the grid frequency by utilizing four-quadrant power converters.
-
Morocco Photovoltaic Policy Energy Storage
Morocco Energy Policy MRV (M-EPM) tool offers multiple benefits: tracking policy performance and measuring impact on key indicators, informing and improving policy design, supporting NDC implementation, as well as facilitating access to climate finance/markets.
FAQs about Morocco Photovoltaic Policy Energy Storage
Are Moroccan solar PV systems subject to increased temperatures?
Moroccan solar PV systems subjected to elevated temperatures under various climate scenarios from 2021 to 2100. Source: International Energy Agency (IEA) . Moroccan wind power plants subject to increased temperatures under various climate scenarios from 2021 to 2100. Source: International Energy Agency (IEA) .
Does Morocco have solar power?
Solar power in Morocco is enabled by the country having one of the highest rates of solar insolation among other countries— about 3,000 hours per year of sunshine but up to 3,600 hours in the desert. Morocco has launched one of the world's largest solar energy projects costing an estimated $9 billion.
Does Morocco's ambitious solar energy plan face challenges?
Source: International Energy Agency (IEA) . Morocco's ambitious initiative to diversify its electricity generation through a substantial expansion of solar power technologies, including PV panels and CSP, may face challenges due to the anticipated rise in dust and sandstorms in the region.
How can the Moroccan electric system achieve long-term sustainability?
However, more needs to be done for the Moroccan electric system to achieve long-term financial, energy, and climate sustainability. Moving forward, continuation of energy subsidies and tariff reform, and acceleration of the incorporation of renewables are instrumental to the success of the National Energy Strategy and NDC.
What is Morocco's largest solar energy project?
Morocco has launched one of the world's largest solar energy projects costing an estimated $9 billion. The aim of the project was to create 2,000 megawatts of solar generation capacity by 2020. The Moroccan Agency for Solar Energy (MASEN), a public-private venture, was established to lead the project.
Is Morocco pursuing wide-scale solar energy development?
Morocco is pursuing wide-scale solar energy development, but is it really as good as it seems?
-
How big will the energy storage field be in the next 10 years
UBS estimates that over the next ten years the energy storage market in the United States could grow to as much as $426 billion, and there are many ways to buy into the surge, including chemical co.
FAQs about How big will the energy storage field be in the next 10 years
How much energy is stored in the United States?
According to Wood Mackenzie, there is 83 GWh of installed energy storage capacity in the United States, including nearly 500,000 distributed storage installations. Current forecasts show that U.S. storage capacity is expected to reach 450 GWh by 2030, falling short of the capacity required to support our nation's energy needs.
Will US storage capacity reach 450 GWh by 2030?
Current forecasts show that U.S. storage capacity is expected to reach 450 GWh by 2030, falling short of the capacity required to support our nation's energy needs. The whitepaper calls on states, regional transmission organizations, and the federal government to take action to accelerate storage deployment and manufacturing. These actions include:
What's new in energy storage policy?
The whitepaper outlines policy recommendations to open markets for storage development, build financial support, grow a domestic storage supply chain, and progress long-duration storage technology. In addition, SEIA is releasing a new 50-state guide to energy storage policies at the state level.
What does a storage whitepaper say about energy security?
These targets are part of a new whitepaper that analyzes the economic and energy security imperative of a strong storage sector. The whitepaper outlines policy recommendations to open markets for storage development, build financial support, grow a domestic storage supply chain, and progress long-duration storage technology.
Why is Doe investing in energy storage?
The underlying motivation for DOE's strategic investment in energy storage is to ensure that the American people will have access to energy storage innovations that enable resilient, flexible, affordable, and secure energy systems and supply, for everyone, everywhere.
Will energy transition investment hit a new record?
This past year was no different: record numbers of electric vehicles were sold in 2024, record amounts of clean power capacity were installed, new energy storage technologies gained traction, and when our investment totals are published later this month, we will hopefully see that energy transition investment hit a new record, too.
-
Store name of energy storage charging pile
An energy storage charging pile refers to a device designed to store electrical energy, which can then be used. Energy storage system (ESS) is regarded as a promising supplement for.
FAQs about Store name of energy storage charging pile
What is energy storage charging pile equipment?
Design of Energy Storage Charging Pile Equipment The main function of the control device of the energy storage charging pile is to facilitate the user to charge the electric vehicle and to charge the energy storage battery as far as possible when the electricity price is at the valley period.
What is the energy storage charging pile system for EV?
The new energy storage charging pile system for EV is mainly composed of two parts: a power regulation system and a charge and discharge control system. The power regulation system is the energy transmission link between the power grid, the energy storage battery pack, and the battery pack of the EV.
What is the function of the control device of energy storage charging pile?
The main function of the control device of the energy storage charging pile is to facilitate the user to charge the electric vehicle and to charge the energy storage battery as far as possible when the electricity price is at the valley period. In this section, the energy storage charging pile device is designed as a whole.
How does the energy storage charging pile interact with the battery management system?
On the one hand, the energy storage charging pile interacts with the battery management system through the CAN bus to manage the whole process of charging.
Where are charging piles installed?
Charging piles are mainly installed in shopping malls, shopping centers, residential parking lots, downstairs units and charging and changing stations, which can provide charging services for electric vehicles of different types and voltage levels. Figure 1. Charging pile for electric vehicles.
What is the processing time of energy storage charging pile equipment?
Due to the urgency of transaction processing of energy storage charging pile equipment, the processing time of the system should reach a millisecond level. 3.3. Overall Design of the System
-
What are the energy storage harness manufacturers and suppliers
This article will mainly explore the top 10 energy storage manufacturers in the world including BYD, Tesla, Fluence, LG energy solution, CATL, SAFT, Invinity Energy Systems, Wartsila, NHOA energy, CSIQ.
FAQs about What are the energy storage harness manufacturers and suppliers
What are the top 10 energy storage manufacturers in the world?
This article will mainly explore the top 10 energy storage manufacturers in the world including BYD, Tesla, Fluence, LG energy solution, CATL, SAFT, Invinity Energy Systems, Wartsila, NHOA energy, CSIQ. In recent years, the global energy storage market has shown rapid growth.
What is energy storage systems (ESS)?
ESS enables efficient capture, bolstering grid stability and maximizing renewable energy integration. We dig deep into the essence of Energy Storage Systems, elucidates critical factors when selecting manufacturers, and spotlights top energy storage system manufacturers.
Who makes the best battery energy storage system?
As the top battery energy storage system manufacturer, The company is renowned for its comprehensive energy solutions, supported by advanced industrial facilities in Shenzhen, Heyuan, and Hefei. Grevault, a subsidiary of Huntkey, is a leader in the battery energy storage sector.
What are the key innovations in energy storage?
Key Innovation: Advanced lithium-ion batteries for consumer and grid applications. Panasonic's battery storage solutions provide reliable backup power and enhance renewable energy use, particularly in collaboration with electric vehicle manufacturers. 5. Nostromo Energy Key Innovation: IceBrick thermal energy storage for commercial buildings.
Why is Panasonic a leading energy storage company?
Thanks to a wide and varied portfolio of solutions, Panasonic has positioned itself as one of the leaders in the energy storage vicinity. Panasonic is one of the industry's top names due to its advances in innovative battery technology alongside strategic partnerships and extensive experience in manufacturing high-quality products.
Who is fluence energy storage?
Fluence, created in January 2018 by Siemens and AES, is a top player in energy storage. By combining their expertise, they focus on improving electric infrastructure with advanced storage solutions. Fluence leads the global market with over 16 years of experience and the largest fleet of energy storage projects.
-
Using liquid cooling energy storage for solar energy storage
In the first part, the result of using PCM (phase change materials) for storage solar energy as sensible and latent energy in conjunction with nanoparticle-laden fluids is presented.
FAQs about Using liquid cooling energy storage for solar energy storage
Are liquid cooled battery energy storage systems better than air cooled?
Liquid-cooled battery energy storage systems provide better protection against thermal runaway than air-cooled systems. “If you have a thermal runaway of a cell, you've got this massive heat sink for the energy be sucked away into. The liquid is an extra layer of protection,” Bradshaw says.
Does a combined air conditioning & thermal storage system use solar energy?
Therefore, our design does utilize a method for storing energy for cooling as needed. The combined air conditioning and thermal storage system is intended as a technology to increase the effectiveness of solar photovoltaic energy use.
Can solar cooling be provided without a storage capacity?
While solar cooling can be provided without any storage capacity, our design is intended to make use of the high levels of sunlight during the peak irradiation time during the day in order to provide cooling during the subsequent period of peak cooling demand. Therefore, our design does utilize a method for storing energy for cooling as needed.
What is the difference between air cooled and liquid cooled energy storage?
The implications of technology choice are particularly stark when comparing traditional air-cooled energy storage systems and liquid-cooled alternatives, such as the PowerTitan series of products made by Sungrow Power Supply Company. Among the most immediately obvious differences between the two storage technologies is container size.
What are the benefits of a liquid cooled storage container?
The reduced size of the liquid-cooled storage container has many beneficial ripple effects. For example, reduced size translates into easier, more efficient, and lower-cost installations. “You can deliver your battery unit fully populated on a big truck. That means you don't have to load the battery modules on-site,” Bradshaw says.
How can a long-duration energy storage system be improved?
Addressing these challenges requires advancements in long-duration energy storage systems. Promising approaches include improving technologies such as compressed air energy storage and vanadium redox flow batteries to reduce capacity costs and enhance discharge efficiency.
-
The latest regulations on energy storage configuration policy in Pakistan
Regulations: The current regulatory landscape for energy storage in Pakistan is limited. A significant trade barrier exists in the form of a 100% cash margin requirement on lithium-ion and lead-acid batteries, making it more challenging for businesses to invest in these technologies.
FAQs about The latest regulations on energy storage configuration policy in Pakistan
What is national electricity policy?
National Electricity Policy identifies three over-arching goals for the power sector, namely, Access to Affordable Energy, Energy Security and Sustainability. Further, the nine areas have been identified under the said policy wherein the policy directions are aimed for the attainment of aforesaid goals.
How many MW of electricity is produced in Pakistan?
The report also states that out of the country's total generation capacity, 2,147MW is produced by renewable energy sources. Solar power, wind and biogas contributed 0.58%, 2.36%, and 0.46% to the electricity procured by the Central Power Purchasing Agency, Pakistan.
Do power sector entities comply with the National Cyber Security Policy?
All power sector entities shall ensure compliance with the relevant directives of the National Cyber Security Policy and its subservient frameworks developed thereunder, to proactively prevent and mitigate possible cyber risks.
Is Pakistan at the energy transition crossroads?
Being categorised as one of the Next Eleven Countries (N-11), Pakistan is at the energy transition crossroads. Like many other countries, Pakistan has promulgated policy initiatives and actions for renewables to mitigate GHG emissions and climate change threats.
How much power does Pakistan have in 2020?
1. Generation Capacity The State of Industry Report issued by the National Electric Power Regulatory Authority (NEPRA) for the year 2020 states that Pakistan has an installed generation capacity of 38,719MW at the close of June 2020. 35,735MW is connected to the NTDC system, whereas 2,984MW is connected to the K-Electric system.
Does are 2019 cover nuclear energy and Hydropower Technologies in Pakistan?
Nuclear energy and hydropower technologies in Pakistan are not covered by ARE 2019. Nuclear energy technology is operated and controlled by the Pakistan Atomic Energy Commission. However, NEPRA has been setting the nuclear energy tariff and hydropower tariff for public procurement.
-
What are the new energy storage pilot projects
Projects will show the ability of energy storage technologies to provide dependable supply of energy as back up generation during a grid outage or other emergency event.
FAQs about What are the new energy storage pilot projects
What is science and Technology Innovation (Energy Storage)?
On November 10, 2020, the National Energy Administration published a list of its first batch of science and technology innovation (energy storage) pilot demonstration projects. The list of projects includes generation-side, behind-the-meter, and grid-side applications, as well as thermal-generation-bundled energy storage for frequency regulation.
How can energy storage technology improve resiliency?
This FOA supports large-scale demonstration and deployment of storage technologies that will provide resiliency to critical facilities and infrastructure. Projects will show the ability of energy storage technologies to provide dependable supply of energy as back up generation during a grid outage or other emergency event.
How much does energy storage cost?
The long-duration energy storage technologies include Electrochemical, Mechanical, Thermal, and Chemical and typically have a duration of 10 hours or more. Estimated capital costs at $150–220/kWh, with the levelized cost of storage projected under $100/MWh for early projects. Potential to reduce to $50–60/MWh.
What is a concrete thermal energy storage (CTEs) pilot plant?
The Concrete Thermal Energy Storage (CTES) pilot plant consists of 7 layers of BolderBlocs stacked in a brickwork-like pattern along with an additional cooling block layer at the bottom needed to insulate the foundations during operation.
How can pre-production storage system design improve manufacturing scale-up?
Identifying and implementing design innovations will align pre-production storage system design to set the stage for manufacturing scale up and improved production of cost-effective, safe, and reliable short-, medium-, and long-duration storage technologies. New Report Showcases Innovation to Advance Long Duration Energy Storage (LDES):
What is long-duration energy storage (LDEs)?
The Long-Duration Energy Storage (LDES) portfolio will validate new energy storage technologies and enhance the capabilities of customers and communities to integrate grid storage more effectively. DOE defines LDES as storage systems capable of delivering electricity for 10 or more hours in duration. Learn more.
-
How often should plug-in hybrid energy storage charging piles be replaced
How many years should electric energy storage charging piles be replaced used to build an EV charging model in order to simulate the charge control guidance module. On this basis, combined with the research of new.
FAQs about How often should plug-in hybrid energy storage charging piles be replaced
Why are batteries and supercapacitors used in hybrid energy systems?
In hybrid energy systems, batteries and supercapacitors are always utilized because of the better performance on smoothing the output power at start-up transmission and various load conditions (Cai et al., 2014). On the other hand, PHEV and BEV requires energy storage charging system, which introduces a new challenge to the grid integration.
How can battery life be extended?
One approach to prolonging battery lifetime is to raise the operating lower cut-off voltage when the battery reaches a capacity degradation threshold 192. These technical challenges can be met through the implementation of advanced energy storage management strategies, with effective estimation of battery SOH and operational optimization.
What is a plug-in hybrid electric vehicle (PHEV)?
Plug-in hybrid electric vehicles (PHEVs) combine ICEs and rechargeable batteries to create a hybrid powertrain. The main difference between PHEVs and HEVs in architecture is that the battery in a PHEV can serve as the primary energy source.
How does energy management system affect battery charging and discharging?
Because the energy management system is responsible for operating the whole energy system, including the battery, it requires the output of the BMS, such as the SOC. Concurrently, the energy management system will make demands on the BMS and battery, affecting charging and discharging 42.
How efficient is a hybrid power source?
Fathabadi (2018a) designed and constructed the FC/UC hybrid power source and found that 96.2% power efficiency, provides a maximum speed of 158 km/h, and covers up to 435 km with a weight of 1880 kg. Proper energy management strategies and optimization lead to long mileage, reduction in emissions and fuel consumption (Wang et al., 2018).
How can energy storage management improve EV performance?
Energy storage management strategies, such as lifetime prognostics and fault detection, can reduce EV charging times while enhancing battery safety. Combining advanced sensor data with prediction algorithms can improve the efficiency of EVs, increasing their driving range, and encouraging uptake of the technology.
-
Energy storage container wiring harness installation
Step-by-Step Assembly InstructionsStep 1: Review the Wiring Diagram Start by carefully reviewing the wiring diagram specific to your energy storage system. Step 4: Insert Wires into Connectors.
FAQs about Energy storage container wiring harness installation
How to install electricity in a shipping container?
Their expertise can ensure the installation is done correctly and safely. To install electricity in a shipping container, follow these steps to ensure a safe and effective setup: Plan and Design: Make a detailed plan showing where you want to put outlets, switches, lights, and other electrical parts.
How do you install electrical wiring in a container?
Prepare the Container: Clean the container and remove any debris. Decide where the electrical wiring will enter and make openings for outlets, switches, and conduits based on your plan. Install Wiring: Install the electrical wiring according to your design.
What is electrical design for a battery energy storage system (BESS) container?
Electrical design for a Battery Energy Storage System (BESS) container involves planning and specifying the components, wiring, and protection measures required for a safe and efficient operation. Key elements of electrical design include:
Is electricity good for a shipping container?
Adding electricity to a shipping container has many benefits, making it a useful and adaptable space for different uses. Here are some key reasons why electricity is good for a shipping container: Versatility: Electricity allows the container to be used for things like mobile offices, pop-up shops, food trucks, or even portable living spaces.
How do you protect a container from a power outage?
Your container needs a reliable power source to function correctly, so consider options like connecting to a nearby electrical grid or using solar panels for remote locations. Circuit Breakers and Fuses: Protect against overloads and short circuits. Grounding: Minimizes the risk of electric shocks.
How do you install a power supply?
Install Outlets and Switches: Mount the outlets, switches, and junction boxes at the chosen spots inside the container. Follow safety guidelines for spacing and installation to avoid electrical hazards. Connect Circuit Breakers: Install circuit breakers in an electrical panel to control electricity flow and protect the system from overloads.
-
Where are the cheaper energy storage charging stations in Kuwait City
Portable EV charging station with DC ultra-fast charging capabilities. Why Go Electric with EIGTC? Fast, Convenient Charging: Our EV charging solutions are designed for speed and convenience.
-
Flywheel energy storage static loss
Compared with other ways to store electricity, FES systems have long lifetimes (lasting decades with little or no maintenance; full-cycle lifetimes quoted for flywheels range from in excess of 10, up to 10, cycles of use), high (100–130 W·h/kg, or 360–500 kJ/kg), and large maximum power output. The (ratio of energy out per energy in) of flywheels, also known as round-trip efficiency, can be as high as 90%. Typical capacities range from 3 to 13.
FAQs about Flywheel energy storage static loss
What causes standby losses in a flywheel energy storage system?
Aerodynamic drag and bearing friction are the main sources of standby losses in the flywheel rotor part of a flywheel energy storage system (FESS). Although these losses are typically small in a well-designed system, the energy losses can become significant due to the continuous operation of the flywheel over time.
What causes standby losses in a flywheel rotor?
Aerodynamic drag and bearing friction are the main sources of standby losses in the flywheel rotor part of a flywheel energy storage system (FESS). Although these losses are typically small in a well-designed system, the energy losses can become significant due to the continuous operation of the flywheel over time.
How does Flywheel energy storage work?
Flywheel energy storage (FES) works by accelerating a rotor (flywheel) to a very high speed and maintaining the energy in the system as rotational energy.
Does the number of charging cycles affect flywheel standby losses?
The effect of the number of charging cycles on the relative importance of flywheel standby losses has also been investigated and the system total losses and efficiency have been calculated accordingly. Content may be subject to copyright.
What are the advantages and disadvantages of flywheels?
They are also less potentially damaging to the environment, being largely made of inert or benign materials. Another advantage of flywheels is that by a simple measurement of the rotation speed it is possible to know the exact amount of energy stored.
What is flywheel standby discharge rate?
Flywheel standby discharge rate relative to the number of cycles. The proposed flywheel system is C2 rating (5 kWh, 10 kW) and takes 30 min charge-discharge time between 50% charge to fully charged and back to 50% state of charge.
-
Standard voltage value of mobile energy storage power supply
The test instruments and meters shall satisfy the following requirements: a) The voltage transformer complies with the stipulations of GB/T 20840. 2; g) The rated power is not less than 1.
FAQs about Standard voltage value of mobile energy storage power supply
What is a mobile energy storage system?
Abstract: A mobile energy storage system (MESS) is a localizable transportable storage system that provides various utility services. These services include load leveling, load shifting, losses minimization, and energy arbitrage. A MESS is also controlled for voltage regulation in weak grids.
What is the optimal scheduling model of mobile energy storage systems?
The optimal scheduling model of mobile energy storage systems is established. Mobile energy storage systems work coordination with other resources. Regulation and control methods of resources generate a bilevel optimization model. Resilience of distribution network is enhanced through bilevel optimization.
Do mobile energy storage systems have a bilevel optimization model?
Therefore, mobile energy storage systems with adequate spatial–temporal flexibility are added, and work in coordination with resources in an active distribution network and repair teams to establish a bilevel optimization model.
How do different resource types affect mobile energy storage systems?
When different resource types are applied, the routing and scheduling of mobile energy storage systems change. (2) The scheduling strategies of various flexible resources and repair teams can reduce the voltage offset of power supply buses under to minimize load curtailment of the power distribution system.
What is a mobile energy storage system (mess)?
During emergencies via a shift in the produced energy, mobile energy storage systems (MESSs) can store excess energy on an island, and then use it in another location without sufficient energy supply and at another time, which provides high flexibility for distribution system operators to make disaster recovery decisions .
Can mobile energy storage systems improve resilience of distribution systems?
According to the motivation in Section 1.1, the mobile energy storage system as an important flexible resource, cooperates with distributed generations, interconnection lines, reactive compensation equipment and repair teams to optimize dispatching to improve the resilience of distribution systems in this paper.